Spring Preload - BMW Motorrad R 1250 GS 2002 Rider's Manual

First push the front height ad-
justment under the mount-
ing 1 then push it into the
locking mechanism 2 until it
engages.
To adjust the low seat pos-
ition, swing the rear height
adjustment 1 into position 3
(identification L).
To adjust the low seat pos-
ition, swing the rear height
adjustment 1 into position 2
(identification H).
To change the angle of seat tilt:
Position front and rear height
adjusters differently.
Installing rider's seat
Remove the passenger seat
( 122).
Adjust the height and angle
of tilt of the rider's seat
( 124).
Engage the riders seat
in mounts 1 on left and
right and lower it on to the
motorcycle.
Applying pressure to the rear
of the seat, push the rider's
seat slightly forward and then
press it firmly down until the
lock engages.

SPRING PRELOAD

without Dynamic ESA
125
OE