Table of Contents
Advertisement
122
SETTING
Install clamping block 1 in the
desired position A or B and
tighten screw 2.
Clamping block on
footrest hinge
M8 x 25
15 lb/ft (20 Nm)
Position footrest 3 on clamp-
ing block 2.
Install screws 1.
Footrest on clamping
block
M6 x 20 / M6 x 12
7 lb/ft (10 Nm)
Remove and install the
footrest on the other side in
the same way.
HANDLEBARS
Adjustable handlebars
Have the handlebars adjusted
by a repair shop, preferably
an authorized BMW Motorrad
dealer.
When adjusting the han-
dlebars, check whether
the mirror and windshield will
collide.
Where appropriate, adjust the
mirror arm accordingly.
with handlebar risers
The handlebar risers can
restrict the free move-
ment of cables and wires.
BMW Motorrad recommends
setting the handlebars to the
upper position (10° mark) if
the handlebar risers are in-
stalled.
OE
Advertisement
Chapters
Table of Contents
