Adjusting mirror arm
4
54
Slide protective cap 1 up over
z
screw connection on mirror
arm.
Loosen the nut 2.
Turn mirror arm into desired
position.
Tighten the nut to the spec-
ified tightening torque, while
holding the mirror arm to en-
sure that it does not move out
of position.
Mirror (counter nut) on
adapter
16 lb/ft (22 Nm)
Slide protective cap over
threaded fastener.
Windshield
Adjusting windshield
Loosen clamping screws 1 on
left and right.
Bring windshield into desired
position by rotating it forward
or back.
Make sure that the windshield
adjustment is identical on the
left and right.
Tighten clamping screws on
left and right.
Handlebars
Adjusting handlebars
The distance of the handlebars
from the rider can be adjusted by
turning the handlebar clamping
blocks by 180°.
Short-reach position, handlebars
toward rider.