Foot distance and height to
peg 1 can be adjusted by
turning through 180° and in-
stallation in position A or B.
Remove screw 1.
Clean the threads.
Install peg 2 in desired posi-
tion A or B.
Turn peg 2 to the desired po-
sition.
Install new screw 1.
Peg to footbrake lever
Thread-locking compound:
micro-encapsulated
10 Nm
FOOTRESTS
with Option 719 Milled Part
Set Classic
OE
or
with Option 719 Milled Part
Set Storm
OE
Adjusting footrests
The footrest is adjusted on
the right and left in the same
way.
The position of the footrest
must be set identically on the
right and on the left.
Remove screws 1.
Remove footrest 3 from
clamping block 2.
Remove screw 2.
121