Table of Contents
Advertisement
Slide protective cap over
threaded fastener.
Handlebars
Adjustable handlebars
The distance of the handlebars
from the rider can be adjusted by
turning the handlebar clamping
blocks by 180°.
Short-reach position, handlebars
toward rider.
Long-reach position, handlebars
away from rider.
Adjusting handlebars
Make sure ground is level and
firm and park motorcycle.
Remove the small screws 1.
Tilting the handlebars too
far can allow air to enter the
fluid reservoirs and make its way
into the hydraulic systems.
Hold the handlebars or lay them
down in such a way that the
reservoirs remain upright.
Remove the large screws 2
while holding the handlebars in
place.
Take off the upper clamping
blocks 3.
Remove the handlebars from
the lower clamping blocks.
4
41
z
Advertisement
Table of Contents
