Handlebars - BMW Motorrad R 1250 GS Adventure Rider's Manual

Remove screws 1.
Remove the footrest 3 from
the clamping block 2.
Remove the screw 2.
Remove clamping block 1.
Install clamping block 1 in the
desired position A or B and
tighten screw 2.
Clamping block on
footrest hinge
M8 x 25
15 lb/ft (20 Nm)
Position footrest 3 on clamp-
ing block 2.
Install screws 1.
Footrest on clamping
block
M6 x 20 / M6 x 12
7 lb/ft (10 Nm)
Remove and install the
footrest on the other side in
the same way.

HANDLEBARS

Adjustable handlebars
When adjusting the han-
dlebars, check whether
the mirror and windshield will
collide.
Where appropriate, adjust the
mirror arm accordingly.
115