Table of Contents
Advertisement
Undo right axle clamping
screw 1.
Remove screw 1.
Undo left axle clamping
screw 2.
Press quick-release axle
slightly toward the inside, so
as to be better able to grip it
on the right-hand side.
Withdraw quick-release
axle 1, support the front
wheel when doing this.
Set down front wheel and
roll forwards out of the front
suspension.
Remove spacer bush 1 from
the wheel hub.
Installing front wheel
WARNING
Use of a non-standard wheel
Malfunctions in ABS operation
See the information on the
effect of wheel size on the
ABS system at the start of
this chapter.
191
Advertisement
Chapters
Table of Contents
