Verifone ® Ruby Terminal Default Settings; Gilbarco ® Terminal Default Settings; Honeywell Bioptic Aux Port Configuration; Datalogic™ Magellan ® Aux Port Configuration - Honeywell Granit 1280i User Manual

Industrial full range laser scanner
Hide thumbs Also See for Granit 1280i:
Table of Contents

Advertisement

®
Verifone
Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone Ruby terminal. This bar code sets the baud rate to
1200 bps and the data format to 8 data bits, no parity bit, 1 stop bit. It also adds a line feed (LF) suffix and programs the follow-
ing prefixes for each symbology:
®
Gilbarco
Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Gilbarco terminal. This bar code sets the baud rate to 2400
bps and the data format to 7 data bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs the follow-
ing prefixes for each symbology:

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration. This
bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Datalogic™ Magellan
Scan the following Plug and Play code to program the scanner for a Datalogic Magellan auxiliary port configuration. This bar
code sets the baud rate to 9600 bps and the data format to 8 data bits, no parity, 1 stop bit.
2 - 2
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Verifone Ruby Settings
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Gilbarco Settings
Honeywell Bioptic Settings
®
Aux Port Configuration
Datalogic Magellan Settings
Prefix
A
A
FF
F
Prefix
A
E0
FF
F

Advertisement

Table of Contents
loading

Table of Contents