Usb Serial Port Emulation; Verifone ® Ruby Terminal Default Settings; Gilbarco ® Terminal Default Settings; Honeywell Bioptic Aux Port Configuration - Honeywell Youjie YJ-HF600 User Manual

Area-imaging scanner

Table of Contents

USB Serial Port Emulation

Scan the following code to program the engine to emulate a regular RS232-based COM Port. If you are using a Microsoft®

Windows® PC, you will need to download a driver from the Honeywell website (www.honeywellaidc.com). The driver will use

the next available COM Port number. Apple® Macintosh computers recognize the engine as a USB CDC class device and

automatically uses a class driver.

Verifone

Ruby Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Verifone Ruby terminal. This bar code sets the baud rate to

1200 bps and the data format to 8 data bits, mark parity bit, 1 stop bit. It also adds a line feed (LF) suffix and programs the fol-

lowing prefixes for each symbology:

Gilbarco

Terminal Default Settings

Scan the following Plug and Play code to program the scanner for a Gilbarco terminal. This bar code sets the baud rate to 2400

bps and the data format to 7 data bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs the follow-

ing prefixes for each symbology:

Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration. This

bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.

USB Serial Port Emulation

Symbology

Prefix

UPC-A

UPC-E

EAN-8

EAN-13

Verifone Ruby Settings