Beep On Bel Character; Good Read And Error Indicators; Beeper - Good Read; Beeper Volume - Good Read - Honeywell Granit 1280i User Manual

Beep on BEL Character

You may wish to force the scanner to beep upon a command sent from the host. If you scan the Beep on BEL On bar code
below, the scanner will beep every time a BEL character is received from the host. Default = Beep on BEL Off.
*Beep on BEL Off

Good Read and Error Indicators

Beeper – Good Read
The beeper may be programmed On or Off in response to a good read. Turning this option off only turns off the beeper
response to a good read indication. All error and menu beeps are still audible. Default = Beeper - Good Read On.
Beeper - Good Read Off
Beeper Volume – Good Read
The beeper volume codes modify the volume of the beep the scanner emits on a good read. Default = High.
Low
* High
3 - 2
* Power Up Beeper On -
Scanner
Beep on BEL On
* Beeper - Good Read On
Medium