Verifone ® Ruby Terminal Default Settings; Gilbarco ® Terminal Default Settings - Honeywell Voyager 1400g Series User Manual

®
Verifone Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone
Ruby terminal. This bar code sets the baud rate to 1200 bps and the data for-
mat to 8 data bits, no parity bit, 1 stop bit. It also also adds a line feed (LF) suf-
fix and programs the following prefixes for each symbology:
®
Gilbarco
Scan the following Plug and Play code to program the scanner for a Gilbarco
terminal. This bar code sets the baud rate to 2400 bps and the data format to 7
data bits, even parity, 2 stop bits. It also also adds a carriage return (CR) suffix
and programs the following prefixes for each symbology:
2 - 6
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Verifone Ruby Settings
Terminal Default Settings
Symbology
UPC-A
UPC-E
EAN-8
EAN-13
Gilbarco Settings
Prefix
A
A
FF
F
Prefix
A
E0
FF
F