Table of Contents
Advertisement
Require Coupon Code or 5 Digit
Addenda
Addenda Timeout
You can set a time during which the scanner looks for a coupon code. If a coupon code is not found within this time period,
the data can be either transmitted or discarded, based on the setting you are using for
Coupon Code
or
UPC-A Number System 4 Addenda
the bar code below, then setting the timeout (from 0-65535 milliseconds) by scanning digits from the
then scanning Save. Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
Coupon GS1 DataBar Output
If you scan coupons that have both UPC and GS1 DataBar codes, you may wish to scan and output only the data from the
GS1 DataBar code. Scan the GS1 Output On code below to scan and output only the GS1 DataBar code data. Default =
GS1 Output Off.
* GS1 Output Off
Addenda Timeout
You can set a time during which the scanner looks for a coupon code. If a coupon code is not found within this time period,
the data can be either transmitted or discarded, based on the setting you are using for
Coupon Code
or
UPC-A Number System 4 Addenda
the bar code below, then setting the timeout (from 0-65535 milliseconds) by scanning digits from the
then scanning Save. Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon code searches.
6 - 30
Required. Set the length (in milliseconds) for this timeout by scanning
Addenda Timeout
Required. Set the length (in milliseconds) for this timeout by scanning
Addenda Timeout
Require Coupon Code, 2 Digit
Addenda, or 5 Digit Addenda
UPC-A/EAN-13 with Extended
Programming
GS1 Output On
UPC-A/EAN-13 with Extended
Programming
Chart,
Chart,
Advertisement
Table of Contents
