Table of Contents
Advertisement
Validate 2 Type 10 Characters,
but Don't Transmit
Validate Type 11 then Type 10
Character, but Don't Transmit
Disable MSI Check Characters
MSI Redundancy
If you are encountering errors when reading MSI bar codes, you may want to adjust the redundancy count. Redundancy
adjusts the number of times a bar code is decoded before transmission, which may reduce the number of errors. Note that
the higher the redundancy count, the longer it will take to decode the bar code. To adjust the redundancy, scan the MSI
Redundancy bar code below, then scan a redundancy count between 0 and 10 on the
cover of this manual. Then scan the
MSI Message Length
Scan the bar codes below to change the message length. Refer to
information. Minimum and Maximum lengths = 1-80. Minimum Default = 3, Maximum Default = 80.
Minimum Message Length
Save
bar code. Default = 0.
MSI Redundancy
Validate 2 Type 10 Characters
Type 10 Character and Transmit
Programming Chart
Message Length Description
and Transmit
Validate Type 11 then
inside the back
(page 6-1) for additional
Maximum Message Length
6 - 45
Advertisement
Table of Contents
