Verifone ® Ruby Terminal Default Settings; Gilbarco ® Terminal Default Settings; Honeywell Bioptic Aux Port Configuration - Honeywell Vuquest 3330g User Manual

®
Verifone Ruby Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Verifone Ruby terminal. This bar code sets the baud
rate to 1200 bps and the data format to 8 data bits, Mark parity bit, 1 stop bit. It also adds a line feed (LF) suffix an pro-
grams the following prefixes for each symbology:
Note: If you are having unexpected results with this programming code, scan the Activate Defaults bar code on
first, then scan the programming code above.
®
Gilbarco Terminal Default Settings
Scan the following Plug and Play code to program the scanner for a Gilbarco terminal. This bar code sets the baud rate to
2400 bps and the data format to 7 data bits, even parity, 2 stop bits. It also adds a carriage return (CR) suffix and programs
the following prefixes for each symbology:
Note: If you are having unexpected results with this programming code, scan the Activate Defaults bar code on
first, then scan the programming code above.

Honeywell Bioptic Aux Port Configuration

Scan the following Plug and Play code to program the scanner for a Honeywell bioptic scanner auxiliary port configuration.
This bar code sets the baud rate to 38400 bps and the data format to 8 data bits, no parity, 1 stop bit.
Note: If you are having unexpected results with this programming code, scan the Activate Defaults bar code on
first, then scan the programming code above.
2 - 4
Symbology Prefix
UPC-A A
UPC-E A
EAN-8 FF
EAN-13 F
Verifone Ruby Settings
Symbology Prefix
UPC-A A
UPC-E E0
EAN-8 FF
EAN-13 F
Gilbarco Settings
Honeywell Bioptic Settings
page 1-4
page 1-4
page 1-4