New Holland 499 Operator's Manual page 16

JACK
NOTE: The 499 mower conditioner may be equipped
with either a stationary square tube style jack or a
removable round tube style jack.
If equipped with a square tube style jack, retract the
jack by turning the handle counter-clockwise. Pull the
spring-loaded handle, 1, and raise the jack up in the
mount. Release the handle to latch the jack in the
raised position.
If equipped with a round tube style jack, retract the
jack by turning the handle counter-clockwise. Pull the
pin and remove the jack. Store the jack, 1, on the left
side of the tongue. Secure the jack with the pin.
NOTE: To prevent the jack from unwinding during
use, loop the chain over the handle before inserting
the pin.
SECTION 1 - GENERAL INFORMATION
1-6
10004562
1
10004560
1
12
13