Table of Contents
Advertisement
OPTIONAL EQUIPMENT
CROP DIVIDERS
A crop divider bundle includes dividers for both ends
of the header. The right crop divider is shown, the left
crop divider is similar.
WARNING
Disengage the PTO, turn off the tractor engine
and remove the key. Wait for all movement to
stop before leaving the operator's position.
Never adjust, lubricate, clean or unplug machine
with the engine running. Failure to comply could
result in death or serious injury.
Attach bracket, 1, with two 3/8" x 1" Grade 5 cap
screws, lock washers, flat washers, and nuts at 2.
NOTE: The deflector must bend down in front of
arrow, 3.
Attach deflector, 3, to the bracket with a 5/16" x 1-3/4"
Grade 5 cap screw, lock washer, flat washer, and nut
at 4.
Attach the brace to the deflector with a 5/16" x 1-1/4"
cap screw, lock washer, and nut at 5. Remove paint
from the deflector so the brace sleeve can be
positioned at the rear hole in the deflector.
Install the clamps around the push bar as shown and
secure with two 1/2" x 1-1/2" Grade 5 cap screws and
lock nuts at 6. Position the brace between the clamps
at the front of the push bar. Tighten this bolt securely.
Tighten the rear bolt to securely clamp the divider to
the push bar.
SECTION 6
10004734
10003628
6-1
6
4
3
1
2
1
5
2
Hide quick links:
Advertisement
Table of Contents
