New Holland 499 Operator's Manual page 94

Disassembly
1. Remove crank pin bearing cups, 9, with a
hammer and punch.
2. Remove the grease fitting from the rocker arm
end of the connecting rod. Place the connecting
rod in a vise with front spacer, 11, up. Use a
punch through the bolt hole to drive out the rear
spacer, 12.
3. Remove seal, 13, cone, 14, and cone spacer, 17.
4. Remove front spacer, 11, seal, 13, and cone, 14.
5. Drive out bearing cups, 15.
6. Use a small punch in the grease fitting hole to
collapse cup spacer, 16, so it can be removed.
SECTION 4 - MAINTENANCE
10
5
4-34
14 15
16
13
17
12
4
7
6
9
4
15
14
13
11
1
8
3
2
49