Table of Contents
Advertisement
HYDRAULIC GUARD ANGLE
ADJUSTMENT KIT
The hydraulic guard angle adjustment kit allows
"on-the-go" guard angle selections between 4
degrees and 10 degrees below horizontal. Also, the
angle adjustment range can be locked at 4 degrees
or limited to 7 degrees. Adjustments are made from
the tractor through the hydraulic lift control.
Installation information is provided with the kit.
WARNING
Disengage the PTO, turn off the tractor engine
and remove the key. Wait for all movement to
stop before leaving the operator's position.
Never adjust, lubricate, clean or unplug machine
with the engine running. Failure to comply could
result in death or serious injury.
REEL SPEED REDUCTION SPROCKET
A sixteen-tooth sprocket, 1, is available for cane or
stemmy crops between 457 mm and 610 mm (18"
and 24") tall where a slower reel speed is necessary
to deliver the material to the rolls. This sprocket
reduces the reel speed by 16%.
Remove the reel drive chain and the center bolt in
sprocket, 2. Remove the sprocket and install
sprocket, 1.
Tighten the center bolt securely and install the chain.
Tighten the reel drive chain spring as detailed in
"Reel Drive Chain" (Section 4).
SECTION 6 - OPTIONAL EQUIPMENT
6-2
20005377
10004735
3
2
1
4
Hide quick links:
Advertisement
Table of Contents
