Table of Contents
Advertisement
SPARE KNIFE STORAGE
Two spare knives can be stored in the frame tube.
Install drilled pins, 1, through the frame holes and
knife heads. Install hairpin cotters, 2, in the drilled
pins.
NOTE: Spare knives do not come with the machine.
MANUAL HOLDER
A manual holder, 1, is mounted on the left side of the
windrow hood, and provides a readily accessible
storage location for this manual.
TRACTOR REQUIREMENTS
45 kw (60 HP) minimum PTO horsepower.
Adequate tractor weight, ballast, wheel spacing, and
tire inflation to stabilize the tractor on hillsides.
Two remote hydraulic circuits with a minimum of 121
bar (1750 PSI) not to exceed 173 bar (2500 PSI).
One of the circuits must be two-way for the swing
cylinder.
540 RPM PTO or 1000 RPM PTO, depending on the
mower-conditioner.
If the tractor has a ground drive PTO, disengage the
PTO before backing the mower-conditioner. Running
the PTO in reverse can damage the hydraulic pump
and motor.
ASAE standard hitch and PTO dimensions.
SECTION 1 - GENERAL INFORMATION
1-2
1
10004727
50004634
2
4
1
5
Hide quick links:
Advertisement
Table of Contents
