New Holland 499 Operator's Manual page 19

SECTION 1 - GENERAL INFORMATION
With the pump in place, the torque arm, 1, should
extend below the drawbar, 3, preventing the pump
from turning with the PTO shaft. Adjust the torque
2
arm as needed by moving it up and down along the
mounting holes provided. Tighten the bolts to the
appropriate torque at this time. Secure the chain
around the drawbar and hook it into the mounting
1
bracket, 2.
To prevent damage to the hydraulic hoses, turn the
tractor and tongue to the extreme left and right
positions. At each extreme position, check the hoses
to be sure they are not pinched or binding. Remove 3
19983051
twists from the hoses, then tighten hose connections
19
securely.
1-9