Creating A Custom Url Redirect; Verifying Web Authentication Changes - Cisco OL-8335-02 Configuration Manual

Customizing the Web Authentication Login Screen

Creating a Custom URL Redirect

Creating a Custom URL Redirect
Use this command to redirect all web authentication clients to a specific URL (including http:// or
https://) after they authenticate:
config custom-web redirecturl url
For example, if you want to redirect all clients to www.AcompanyBC.com, use this command:
config custom-web redirecturl www.AcompanyBC.com
To change the redirect back to the default setting, enter clear redirect-url.

Verifying Web Authentication Changes

Enter show custom-web to verify your web authentication operation changes. This example shows the
output from the command when the web authentication settings are at defaults:
>show custom-web
Cisco Logo................................. Enabled
CustomLogo..................................... Disabled
Custom Title................................... Disabled
Custom Message................................. Disabled
Custom Redirect URL............................ Disabled
External Web Authentication Mode............... Disabled
External Web Authentication URL................ Disabled
This example shows the output from the command when the web authentication settings have been
modified:
>show custom-web
Cisco Logo................................. Disabled
CustomLogo..................................... 00_logo.gif
Custom Title................................... Welcome to the AcompanyBC Wireless LAN!
Custom Message................................. Contact the System Administrator for a
Username and Password.
Custom Redirect URL............................ http://www.AcompanyBC.com
External Web Authentication Mode............... Disabled
External Web Authentication URL................ Disabled
Cisco Wireless LAN Controller Configuration Guide
5-14
Chapter 5 Configuring Security Solutions
OL-8335-02