Cisco OL-8335-02 Configuration Manual page 175

Chapter 9 Configuring Radio Resource Management
Table 9-1
Parameter
Tx Power Level Assignment
Power Level Assignment
Method
OL-8335-02
RRM Parameters (continued)
Description
The controller's dynamic power assignment mode.
Options: Automatic, On Demand, or Fixed
Default: Automatic
Power Level
Assignment
Method
Automatic
On Demand Causes the controller to periodically evaluate the
Fixed
Note
Description
Causes the controller to periodically evaluate and, if
necessary, update the transmit power for all joined access
points.
transmit power for all joined access points. However, the
controller updates the power, if necessary, only when you
click Invoke Power Update Now.
The controller does not evaluate and update the
Note
transmit power immediately after you click
Invoke Power Update Now. It waits for the next
interval (default is 600 seconds).
Prevents the controller from evaluating and, if necessary,
updating the transmit power for joined access points. The
power level is set to the fixed value chosen from the
drop-down box.
Note The transmit power level is assigned an integer
value instead of a value in mW or dBm. The
integer corresponds to a power level that varies
depending on the regulatory domain in which the
access points are deployed. See
9-25 for information on available transmit power
levels.
For optimal performance, Cisco recommends that you use the
Automatic setting. Refer to the
and Power Assignment Globally for a Controller" section on
page 9-27 for instructions if you ever need to disable the
controller's dynamic settings.
Cisco Wireless LAN Controller Configuration Guide
Configuring Dynamic RRM
Step 5 on page
"Disabling Dynamic Channel
9-19