Cisco OL-8335-02 Configuration Manual page 197

Chapter 10 Configuring Mobility Groups
Figure 10-9 WLANs Page
On the WLANs page, click the Mobility Anchors link for the desired WLAN. The Mobility Anchors
Step 2
page for that WLAN appears (see
Figure 10-10 Mobility Anchors Page
Select the IP address of the controller to be designated a mobility anchor in the Switch IP Address
Step 3
(Anchor) drop-down box.
Click Mobility Anchor Create. The selected controller becomes an anchor for this WLAN.
Step 4
Note
Repeat
Step 5
Configure the same set of anchor controllers on every controller in the mobility group.
Step 6
OL-8335-02
To delete a mobility anchor for a WLAN, click Remove to the right of the controller's IP
address.
Step 3 and Step 4 to set any other controllers as mobility anchors for this WLAN.
Figure 10-10).
Cisco Wireless LAN Controller Configuration Guide
Configuring Auto-Anchor Mobility
10-13