Stop Command; Clear Command; Lock / Unlock Commands - Flowmetrics 922-MFC Installation And Operating Instructions Manual

Reference:
Function:
reads: Run? Optionally "STANDBY" may be used in the
same capacity.
Example:
Reference:
Function:
This command consists of two words, the first being
CLEAR and the second being either TOTALIZER or
ALARM.
Example:
Reference:
Function:
Format:
The instrument is locked by supplying a 5 digit lock code.
Example:
Format:
continued next page . . .

STOP COMMAND

See Section 3.14
Stops the instrument from running. Display
STOP

CLEAR COMMAND

See Sections 3.9 and 3.10
Clears Alarms or Clears Totalizers.
CLEAR Totalizer (CR)
CLEAR Alarm

LOCK / UNLOCK COMMANDS

See Section 3.11
Locks or unlocks the instrument.
LOCK [nnnnn]
LOCK 12345
UNLOCK [nnnnn]
(CR)
(CR)
8-19
(CR)
(CR)
(CR)