Programming Considerations; Programming; Front Panel Keypad Operation - Flowmetrics 922-MFC Installation And Operating Instructions Manual

Chapter 3

3.0 Programming Considerations

3.1 Programming

Programming the Flow Computer for your desired opera-
tion is essentially simple. The variables required by the
unit are displayed as the operator progresses through the
setup menu. The unit will automatically determine its
setup parameter requirements depending on the computa-
tion and hardware setup selections. To aid in the setup
procedure review this chapter and fill out the worksheet
as you go along.

3.2 Front Panel Keypad Operation

Programming is accomplished through the front panel
with the use of the 16 keys labeled 0-9, A, B, C, D, ENT
and CLR. The functions of each one is described as fol-
lows.
A --
B --
C --
D --
Just remember:
Advances to the next item in the menu or sub-menu.
If you are at the last item, the A button will have
no effect on the display. The display will not wrap
around to the top of the menu.
Backs up to the previous item in the menu or sub-
menu. If you are at the first item, the B button will
have no effect on the display. The display will not
wrap around to the bottom of the menu.
Cancels current operation and goes back to the top of
the menu or sub menu. No matter where you are in
the menu structure, hitting cancel twice will always
bring you back to Run? or Show data?
Inserts a decimal point in the numerical value you are
entering.
A = A
B = B
C = C
dvance
D = D
ack up
3-1
ancel
ecimal point.