Flowmetrics 922-MFC Installation And Operating Instructions Manual page 83

After each successfully parsed phrase, the instrument will
immediately show the variable that has been changed and
the new value it has been set to.
If a phrase cannot be understood or is ambiguous, the
instrument will give you an error message. For example:
SET flow temperature to 12 (CR)
The instrument will not understand this command, and
will give you a "Syntax Error" message.
with this command is that it does not understand what
you want to setup, alarm or scale.
A more subtle type of problem with a command is as fol-
lows:
SET flow alarm to 100 (CR)
This phrase will also generate a "Syntax Error" because
you have not fully specified the command. Specifically, it
is unclear whether you mean the LOW flow alarm or
the HIGH flow alarm.
Reference:
See Sections 3.8 through 3.8.5 in the Operator Manual.
REQUIRED WORDS:
SET temperature low scale
SET temperature high scale
SET reference temperature
SET temperature low alarm
SET temperature high alarm
SET temperature two low scale
SET temperature two high scale
SET temperature two low alarm
SET temperature two high alarm
(Continued on next page.)
OPTIONAL WORDS:
input one
input one
input
input
8-10
The problem
one
one