Flowmetrics 922-MFC Installation And Operating Instructions Manual page 87

SET BAUD:
Reference:
Format:
Function:
nnnn. nnnn may be 300, 1200, or 9600. The baud rate is
immediately set to the value specified.
Remember: 300 Baud may cause undesirable delays in
Example:
SET EXCEPTION:
Reference: See 8-17
Format:
Function:
Exception Reporting is a function that allows the operator
to view different parameters that have recently gone into
an alarm condition. (See section on Exception Reporting
in this chapter.)
Example:
See Section 3.13
SET BAUD [nnnn] (CR)
Sets the baud rate to the value specified in
communication.
SET BAUD 1200
SET EXCEPTION [ON, OFF]
Turns Exception Reporting ON or OFF.
SET EXCEPTION on
8-14
(CR)
(CR)