Print System Setup - Flowmetrics 922-MFC Installation And Operating Instructions Manual

3.18 Print System Setup

This feature is for use in documentation. When this menu
item is selected, an entire print out of all the user defined
parameters is sent out the RS232 port.
DISPLAY
Running . . .
Show Data?
Running . . .
Go to standby?
Continue Pressing A until
Running . . .
Print system setup?
A system dump of the parameters through the RS232 se-
rial communications port is performed.
3.19 Examine Hardware
In the running mode parameters cannot be changed but
they may be viewed. This is done by using one of the
Examine menus (Examine Hardware, Examine Comps
and Examine Variables).
This feature is used to examine the hardware setup con-
figuration of the unit. Operation is as follows:
DISPLAY
Running . . .
Show Data?
Continue Pressing A until
Running . . .
Examine Hardware?
Once selected, use A key to scroll through the hardware
setup. Use the C key to return to Show Data?
3-36
PRESS
A
A
ENT
PRESS
A
ENT