Setting The Hardware - Flowmetrics 922-MFC Installation And Operating Instructions Manual

Graphical representation of the Engineering units menu
Engineering Units?
Use the following review to select the desired units for
your application.
English (Imperial):
described in Appendix i.
kPa (Metric):
scribed in Appendix i.
kg/cm2 (Metric):
described in Appendix i.
bar (Metric):
scribed in Appendix i.

3.7 Setting the Hardware

The hardware selection determines from which input ter-
minals the unit will get its raw data. There are no dip
switches or cards to change to go from one type of input
to another. Internal analog switches activate the proper
terminals for the input type selected. Review the specifi-
cation sheets for each type of input device to determine
your needs.
Prompt
Selections
Temperature °F; Pressure PSI; Other data as
Temperature °C; Pressure kPa; Other data as de-
Temperature °C; Pressure kg/cm2; Other data as
Temperature °C; Pressure bar; Other data as de-
ENT
Engineering units:
English?
kPa (Metric)?
A
kg/cm2 (Metric)?
bar (Metric)?
3-7
B