Examine Command - Flowmetrics 922-MFC Installation And Operating Instructions Manual

Then when the instrument is running and the PRINT INTER-
VAL is greater than 0.24999 minutes, the instrument will
show:
Reference:
Function:
ine setup information about the instrument.
EXAMINE COMPUTATIONS
Examines if computations that will be used have been set for
Volume, Mass or Heat for Gas, Liquid or Steam.
EXAMINE UNITS
Examines which engineering units have been set in the in-
strument, (English or Metric).
EXAMINE HARDWARE
Examine specific hardware settings of the instrument, and
tells if instrument is locked or unlocked
SPECIFIC EXAMINE COMMANDS
In addition to the EXAMINE Commands listed previously,
there are SPECIFIC EXAMINE COMMANDS that allow spe-
cific parameters to be examined remotely.
11:55:52 Monday
Flow rate
Totalizer
Pressure

EXAMINE COMMAND

See Section 3.19 to 3.21
The EXAMINE commands are used to exam-
January 11, 1988
10.000 SCFM
1245.000 cu-ft
12.000 PSIG
8-16