Set Command - Flowmetrics 922-MFC Installation And Operating Instructions Manual

SET COMMAND:

SET COMMANDS allow functions to be set remotely.
SET COMMANDS:
SET COMPUTATIONS - Sets the computations that will
be used for Volume, Mass or Heat Flow.
SET UNITS - Sets engineering units of the instrument to
English or Metric.
SET HARDWARE - Sets specific hardware parameters of
the instrument.
SET TIME - Sets the internal real time clock.
SET DATE - Sets the internal date of the instrument.
SET LIST - Sets up the list of calculated values that will
be printed through the serial port while running.
SET EXCEPTION - Turns exception reporting ON or
OFF.
You will also use the SET command to set the operating
parameters of the instrument. Details on the SET com-
mand are on the following pages.
8-6