Table of Contents
Advertisement
be transferring data between your terminal and the in-
strument. You have a choice of 300, 1200, or 9600 baud.
The second thing is to select the instrument identification
(All of these are outlined in section 4.12).
On initial power up, the instrument default conditions are
9600 baud and Device No. 01.
Once these parameters have been set, you are free to com-
municate with the instrument using the commands de-
scribed below.
using the front keypad of the instrument, you will be un-
able to use the RS-232 communication option until they
are set up properly.
Throughout the text there are references to the rest of the
Manual. You should refer to them for additional informa-
tion and clarification.
COMMAND
KEYWORDS:
SET
EXAMINE
RUN
STOP
CLEAR
LOCK
UNLOCK
SYSDUMP
"X" Command
More specific descriptions follow:
If these parameters have not been set up
COMMAND CATEGORIES:
FUNCTION:
Sets variables & parameters
Examines variables & parameters
Start the instrument
Stop the instrument
Alarm or Totalizer
Locks instrument
Unlocks instrument
Show everything
Shows specific piece of information
8-5
Advertisement
Chapters
Table of Contents
