Table of Contents
Advertisement
125
STEP 6
1. Remove bolts (12), spring washer (11) and washers (10) from handlebar post (14) with spanner (A).
2. Draw the handle pulse wire (9) through the hole of handlebar post (14).
3. Fix middle handlebar (4) to handlebar post (14) with bolts (12), spring washer (11) and washers (10)
from handlebar post (14) using spanner (A).
4. Connect computer wire (1a) with handle pulse wire (9) and computer wire (1b) with trunk wire (80).
5. Take out the bolts (3) and washers (2) from the back of computer (1) with spanner (A). Then attach
computer (1) to handlebar post (14) with bolts (3) and washers (2) using spanner (A).
6. Insert adapter wire (125) to power hole on the main frame (20), then plug the adapter into an outlet.
Attention: Turn off the power when equipment is not in use.
12
| ASSEMBLY INSTRUCTIONS
#12 M8 *20*S5 - 2pcs
#11 D8 - 2pcs
#10 D8 *
20*2 - 2pcs
ф
#3 M4*12 - 4pcs
#2 D4 *
12*1 - 4pcs
ф
2
3
20
1
80
1a
1b
14
9
10
A S5
4
11
12
13
1b
80
1a
9
Advertisement
Table of Contents
