Page 1
X-02 OWNER’S MANUAL Product may vary slightly from the item pictured due to model upgrades Read all instructions carefully before using this product. Retain this owner’s manual for future reference. NOTE: This manual may be subject to updates or changes. Up to date manuals are available through our website at...
Before using the equipment, check that the nuts and bolts are securely tightened. If you hear any unusual noises coming from the equipment during use and assemble, stop immediately. Do not use the equipment until the problem has been rectified. X-02...
Page 4
The equipment is not suitable for therapeutic use. There are many functions of the computer, which value will show when using the equipment according the amount of exercise, here warmly remind you that the value of heart pulse just give you some reference. X-02...
4. ASSEMBLY INSTRUCTIONS STEP 1: Install the Stabilizers 1. Attach the Stabilizers (2&3) onto the Main frame (1), secure with the Carriage bolts (46), Arc washers (5), and Acorn nuts (47). X-02...
Page 8
COUNTERCLOCKWISE and the right bolt CLOCKWISE. Move the Crank to a proper angle for easy tightening of Bolts. While you assemble this step, hold the “62L/R” part as per the diagram below. The examples marked with X are incorrect. The “62L/R” part must be horizontal to be correctly screwed crankshaft. X-02...
Page 9
1. Insert the Handle bars (7L&7R) into the Swing bars (4L/R) accordingly. Select a comfortable height for exercise, and make sure both Handle bars are at a same level. 2. Lock in place with Knobs (17).Finally 3. Attach the plastic caps(71) X-02...
Page 10
2. Attach the Computer post (73) onto the Connecting tubes (28). Secure with Flat washers (41) and Hex bolts (43). Cover the Bolts with Caps (71). 3. Connect the sensor wire(26) and extension wire(37) 4. Check and re-fasten the Knobs (17). X-02...
Page 11
Cross screw(64) and flat washer(74). 3. Attach the Dumbbell bracket (81) to the Handlebar post (73) with Cross screw (82). Place on the Dumbbells (83&84). STEP 8: Attach resistance bands 1. Buckle the Rope (86) to the Connection chips (85). X-02...
The more tightly the friction belt wraps tension knob after you finished re-strapping around the fan wheel, the harder it is for you to pedal (more tension) Friction Belt X-02...
CALORIES: Counts total calories from start to end of workout a) CALORIE COUNT DOWN: Press the “MODE” button until “CAL” appears. Press the “SET” button to set exercise calories. When the “SET” value reaches is zero, the computer alarm will sound for 5 seconds. X-02...
Page 14
Running Time 00:00-99:59 Current speed 0.0~999.9 KM FUNCTION Trip Distance 0.0~999.9 KM Total distance(ODO) 0.0~999.9 KM Calories 0.0~999.9 Kcal 40~240BPM Pulse Rate Battery type 2 pcs of size - AA or UM - 3 Operating temperature 0℃~+40℃ -10℃~+60℃ Storage temperature X-02...
For all warranty or support related enquiries an email must be sent before contacting us via any other means. Head Office and Customer Service: Global Fitness and Leisure Pty Ltd 17 Fordson Rd Campbellfield VIC, 3061 Australia PH: 03 9357 2166 X-02...
This will eliminate the movement and static electricity factors. If your hands are dry, then wet them slightly (saliva works as a great conductor if this doesn’t bother you). For more information, please contact our Lifespan Technical Support Department www.lifespanfitness.com.au support@lifespanfitness.com.au...
Need help?
Do you have a question about the X-02 and is the answer not in the manual?
Questions and answers