SMC Networks JXC Series Manual page 3

"Normal Mode" for detailed setting
Select "Normal Mode" when detailed setting is required.
¡Step data can be set in detail.
¡Signals and terminal status can be monitored.
<When a PC is used>
Controller setting software
¡Step data setting, parameter
setting, monitoring, teaching,
etc., are displayed in different
windows.
<When a TB (teaching box) is used>
¡Multiple step data can be
stored in the teaching box and
transferred to the controller.
¡Continuous test drive by up to
5 step data
Teaching box screen
¡Each function (step data setting,
test drive, monitoring, etc.) can
be selected from the main menu.
The actuator and controller are provided as a set.
Confi rm that the combination of the controller and actuator is correct.
<Check the following before use.>
q Check the actuator label for the model number. This number should match that of the controller.
w Check that the Parallel I/O confi guration matches (NPN or PNP).
q
¡Parameters can be set.
¡JOG and constant rate movement, return to origin, test drive, and testing of forced output can be performed.
Step data
setting window
Parameter
setting window
Menu Axis 1
Step data
Step
Parameter
Step No.
Test
Main menu screen
Movement MOD
Step data
setting screen
Actuator
Step Motor Controller
Monitoring window
Axis 1
Test DRV Axis 1
0
Step No. 1
Posn 123.45 mm
Test screen
(They can be ordered separately as well.)
Controller
JXC
Series
Teaching window
Out mon Axis 1
[ ]
BUSY
[ ]
SVRE
SETON [ ]
Monitoring screen
q
w
2