Advertisement
Operation
Split a Flexi Zone
The UI allows the user to set a FLEXI zone but also to slit an already created FLEXI zone
MAIN ACTION FROM THE USER
Once a FLEXI zone is created the user can split the zone using the right LCD TS.
The dedicated icon (SPLIT icon) allows the user to split the FLEXI zone in single zones.
After that the icon is pressed each single zone takes the power value previously associated to the FLEXI.
Selecting each single zone on the left LCD TS and using then the slider the user can change the value of
each zone to the level he desires.
Now the user can also add a timer to each zone by selecting the single zone on the left LCD TS
If pot are not added on the split zones, the zones go in pan detection
Switch off the hob by pressing ON/OFF
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
Advertisement
