Advertisement
Operation
Set cooking anywhere function
It is possible to associate the COOKING ANYWHERE function. With this function the entire surface is set at the same
power level.
MAIN ACTION FROM THE USER
The user taps on the U button.
Using the right arrow he goes to Cook Anywhere function. He selects the function using the "OK" icon.
The entire surface is set to the same power level of the previously working zone.
If there are not working zones when the "Cooking anywhere" function is activated the user must set the power level
interacting with the slider in order to set the power for the entire hob.
The user adds a pot on the hob and taps "ADD A POT" icon on the right LCD TS. This performs a refresh allowing the
hob to detect where the pot has been added
Every time the user adds a pot on a different zone he has to tap on "ADD A POT" icon on the right LCD TS. If the user
changes the position of the previously added pot this action is not needed.
If two zones are delivering power before the Cooking Anywhere activation, the CA function will get the value of the lower
power delivered. Then the user can adjust the value of the entire plaque using the slider.
If the user interacts with the slider he can increase or decrease the power level of the entire surface
It is possible to Exit from the Cooking Anywhere function by tapping on the EXIT icon on the right LCD TS
If the selected zones are not covered by the pot the enlighten zones in the left LCD TS will blink for 30 seconds.
•
If no action are performed, after 30s the Hob switch OFF
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
Advertisement
