Operation
Set a timer
It is possible to associate a timer to each cooking zone. The UI presents a Timer icon "t" on the left LCD TS.
MAIN ACTION FROM THE USER
▪
If the user does not set any cooking zone the timer is automatically associated to the last zone selected ("t" on
the bottom right corner of the zone indicates it).
▪
Select the chosen zone by touching the left LCD TS.
▪
Select the timer icon on the right LCD TS.
▪
Set the timer by using the "+" and " - " icons of the right LCD TS setting the minutes for the timer.
▪
Using the "OK" icon on the right LCD TS the user confirms the timer activation for the selected zone.
▪
"t" lights up on the bottom right corner of the selected zone.
▪
The "t" before remaining fixed blinks for 3 seconds to let the user understand that timer has been applied to that
zone.
▪
The right LCD TS shows the countdown as soon as the Duration is activated.
▪
It is possible to reset the timer function by pressing the RESET icon : "00" appears on right LCD TS and the coil
will continue to work untimed.
▪
If only minutes are set the countdown will immediately show the remaining time in format mm:ss (picture below).
▪
When timer expires "00" appears on right LCD TS and the linked cooking zone goes in OFF
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati