Advertisement
Operation
Run Mode
The UI shows the current power from 1 to 18 in the left LCD TS correspondent to each cooking zone
MAIN ACTION FROM THE USER
Select a cooking zone on the left LCD TS by tapping or sliding on it or adding a pot on it. The related zone lights up on the
left LCD TS and the text "Set power" is displayed on the right LCD TS.
Start to cook by sliding finger on the SLIDER (the value is incremented on the related zone of left LCD TS)
If the user touches the SLIDER the position of the finger is recognized and the correspondent power level is displayed on
the left LCD TS and on the top backlighted bar
The zone is lighted up
If the user touches POWER, "P" is displayed on the related zone of LCD TS
Increase the power level by sliding on SLIDER from left to right (starting from the correspondent power level or at its right)
Decrease the power level by sliding on SLIDER from right to left (starting from the correspondent power level or at its left)
Switch off the cooking zone by sliding the SLIDER till OFF correspondent level
If no other zone are active, after 30s
Switch off the Hob by pressing ON/OFF
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
Advertisement
