Advertisement
Operation
Set assisted cooking functions
When all the options have been set the user must place a pot on the hob. The message on the right LCD TS is showing this
mandatory step. The hob goes in Pan detection.
-
For some cooking cycles, it is possible to let the hob detect the pot and move to the next step automatically
The system starts to cook with multi-step process. The "A" is showed on the zone covered by the pot where Assisted Cooking
has been activated.
In this case the hob starts to preheat the pot before asking to add food on it. The loading bar shows the remaining time for this
cooking step.
-
By pressing the BACK arrows the user goes back to the parameter selection (in this case Thickness selection)
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
Advertisement
