Advertisement
Operation
Residual heat
If any residual heat indication is recognized by the system, "H" is displayed on the related zone of the left
LCD TS.
The "H" is present for each single zone. For instance if the FLEXI is composed by two zones, and
both the zones are not covered by any pot but they are still hot, two "H" will be shown (picture
above).
When residual heat is no longer present but other cooking zones are active, "H" is switched off on the
related zone of the left LCD TS.
When residual heat is no longer present and if no other cooking zones are active, the hob goes in
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
OFF.
Advertisement
