Advertisement
Operation
Set power level & start the cycle
This slied is about pot recognition at startup
If the user does not touch any keys for at least 30sec, and there are no active zone, than
the hob automatically goes in OFF
The UI plays the special OFF tone
MAIN ACTION FROM THE USER
Placing a pot on the interested zone (picture on the right)
If a coil is covered, it should be recognized within 20 seconds from hob switched on, and
a "0" appears on each coil determining a zone on the left LCD TS
If the pot covers more than 1 coil, the zones will be visualized with a "0" on each coil.
User has to manually link the zone (as for the other linked zone)
If more pots are placed on the hob, they are recognized and visualized as explained above
The product goes in stand by after 30 sec.
"0" markers will turn off after 60 seconds from hob switched on
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
Advertisement
