Advertisement
Operation
Depowering
When the user decides to give BOOSTER power to a zone the "P" on the left LCD TS appears in
correspondence of the zone where the BOOSTER was set.
If the user decides to give BOOSTER level to a second zone, due to the impossibility of the hob to give
BOOSTER to too many zones, the hob and the LCDs will react accordingly:
The first zone that has been set as BOOSTER level blinks on the left LCD TS
Its value will decrease from "P" to the calculated power level (for instance 14 according to how
many coils are working at the same time)
The hob will sounds a "beep" and the first zone will blink
In the meanwhile the right LCD TS will write "Depowering"
If the depowered zone is selected again, a message seeing "depowering" is shown.
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
BEEP
Advertisement
