Advertisement
Installation
Full integrated Installation
●
Make the cut-out as described and try the fit-in of
the hob
●
Before gluing the hob to the worktop remove the
6 screws, which have the screw head on the
outside.
This is important, they are not reachable after
installation!
●
Put in 6 screws with the bigger head from
inside of the frame.
These ones can be loosen easier, when the hob is
installed.
The glass frame will stay in the worktop but the
metal support with the electronic can be removed
by loosing these screws
On the back side there are 2 hooks, no screws
WHIRLPOOL CORPORATION ▪ CONFIDENTIAL ▪ EMEA CS&Quality Technical Training and Serviceability Team ▪ By Nicola Padula and Nicola Bargagnati
Advertisement
