Advertisement
PRODUCT SAFETY INFORMATION
•
Read the instructions carefully before using the machine. The machine may only be used
as described in this manual.
•
It is prohibited to start fire near the machine.
•
Fire extinguisher class ABC should always be kept easily accessible near the machine.
•
Warning! Keep in mind when using this equipment that it can create sparks that can ig-
nite fire around dry vegetation.
•
Never leave the machine with the engine running. Always switch off the engine and pull
out the plug when leaving the equipment - even for a short while.
•
The machine may only run on 3-phase 400V grounded jack with 32A fuse. The outlet must
be installed by a qualified electrician.
•
For your and others' safety, make sure that the machine is connected to a grounded sock-
et.
•
Keep the work area free from bystanders, moving parts increase the risk of accidents.
•
Avoid using / storing the machine where it get exposed to rain or moisture.
•
Make sure the work area is well-lit.
•
Do not use electrical machines near flammable gases or liquids.
•
Children should never stay in the work area, never allow children to handle machine,
tools or extension cables.
•
The machine works best and safest when it is used in the capacity it is intended for, do not
try by any means to increase the machine's capacity.
•
Stand firmly and do not stretch over the machine when it is running.
•
Check the wires and extension cables at regular intervals, to ensure that it remain undam-
aged
•
Unplug the power cord when the machine is not in use and when performing service.
•
Make sure the power switch is turned off (OFF mode) before plugging the machine
•
Do not move the machine whilst it is running.
•
Never leave the machine unattended whilst it is running. During operation, only the op-
erator is allowed to be in the vicinity of the machine.
•
Keep the workplace clean and free of obstacles to minimize the risk of accidents. Lying
debris or other materials that may be in the way during operation may result in accidents.
•
Only the operator may be near the machine during work. Risk zone 5 m around the ma-
chine. The machine is made for solitary work only
•
Do not force the saw, push the cutting unit as slowly as possible to get the best results.
•
Do not use the machine if large vibration occurs, stop the machine immediately and
check the error, correct the fault before reusing the machine.
•
Do not change engine settings unless engine manufacturer told so.
•
Install the machine on a flat surface.
•
Persons with pacemaker should consult their physician before using a machine. Electro-
magnetic fields near a pacemaker can cause pacemaker disorders or pacemakers fail to
function. Caution is required when working near the magnetic field of the engine
•
Be sure to keep the balance and stand still while driving to get better control of the equip-
ment in unexpected situations
•
The engine must not be covered during operation. Keep the equipment surrounding
clean and free from obstacles and other objects.
•
Keep your hands and feet away from rotating parts, never bend over the saw belt!
INCASE OF EMERGENCIES
In case of an emergency please dial 112.
Keep cell phone or emergency phone available specially when working alone. First aid kit and
fire extinguishers must be kept easily accessible during all work, maintenance and service.
Table of contents
5
Advertisement
