Advertisement
3.
Install the feet onto the square tube left and right side of the cutting head unit. Loosen
the bolts using a 16mm wrench. Make sure you mount them correctly
this side should
face the rails
4.
Mount the stabilizer's frame behind the cutting head unit and the stabilizers undeneath
(fig A), install the winch above the cutting head unit (fig. B). the electrical box is mounted
on the stabilizers frame (fig C) ensure that the cables aren't pulled to hard or get pinch.
Fig. A
Stabilizers (right-left)
tabilizer's frame
ASSEMBLY - FEET AND FRAME
Table of contents
Fig. B
Fig. C
15
Advertisement
