Mitsubishi Electric MELSEC L Series User Manual page 17

Remote output (RY)
Remote register (RWr)
Remote register (RWw)
Reserved station
Return
RIRD
RIWT
Routing
Slave station
Transient transmission
Downloaded from ManualsNet.com
Term
Bit data output from the master station to a slave station (For some areas in a local station, data are output
in the opposite direction.)
Word data input from a slave station to the master station (For some areas in a local station, data are input
in the opposite direction.)
Word data output from the master station to a slave station (For some areas in a local station, data are
output in the opposite direction.)
A station reserved for future use. This station is not actually connected, but counted as a connected station
A process of restarting data link when a station recovers from an error
The abbreviation for JP.RIRD and GP.RIRD.
This dedicated instruction is used in programs of the master/local module.
The abbreviation for JP.RIWT and GP.RIWT.
This dedicated instruction is used in programs of the master/local module.
A process of selecting paths for communication with other networks.
CC-Link IE Field Network requires communication paths to be preset using routing parameters to
communicate with stations on different networks.
A head module does not require routing parameters. Communications with other networks are performed
according to the routing parameters set to the master station.
A generic term for stations other than a master station: local station, remote I/O station, remote device
station, and intelligent device station
A function of communication with another station, which is used when requested by a dedicated instruction
or GX Works2
search engine
User's manual for the master/local module used
User's manual for the master/local module used
User's manual for the master/local module used
Description
15