Communication Test; Cable Test - Mitsubishi Electric MELSEC L Series User Manual

9.4
Communication test checks if transient transmission data can be properly routed from the own station to the
communication target. For how to perform a test, refer to the following.
User's manual for the master/local module used
9.5
Cable test checks if the Ethernet cables are properly connected. Only the Ethernet cable connected to the PORT1 or
PORT2 of the target station is tested. For how to perform a test, refer to the following.
User's manual for the master/local module used
80
Downloaded from ManualsNet.com

Communication Test

Cable Test

search engine