Tektronix PM 101 Instruction Manual page 6

PM 101
OPERATORS SAFETY SU
The general safety information in this part of the summary
is for both operating and servicing personnel. Specific
warnings and cautions will be found throughout the
manual where they apply, but may not appear in this
summary.
TERMS
In This Manual
CAUTION statements identify conditions or practices that
could result in damage to the equipment or other property.
WARNING statements identify conditions or practices
that could result in personal injury or loss of life.
As Marked on Equipment
CAUTION indicates a personal injury hazard not im­
mediately accessible as one reads the marking, or a
hazard to property including the equipment itself.
DANGER indicates a personal injury hazard immediately
accessible as one reads the marking.
SYMBOLS
In This Manual
This symbol indicates where applicable
A
LJ.:::::
cautionary or other information is to be
found.
As Marked on Equipment
f
DANGER - High voltage.
@
Protective ground (earth) terminal.
&
ATTENTION - refer to manual.
iv
ARY
Power Source
This product is intended to operate from a power module
connected to a power source that will not apply more than
250 volts rms between the supply conductors or between
either supply conductor and ground. A protective ground
connection by way of the grounding conductor in the
power cord is essential for safe operation.
Grounding the Product
This product is grounded through the grounding conduc­
tor of the power module power cord. To avoid electrical
shock, plug the power cord into a properly wired recep­
tacle before connecting to the product input or output
terminals. A protective ground connection by way of the
grounding conductor in the power module power cord is
essential for safe operation.
Danger Arising From loss of Ground
Upon loss of the protective-ground connection, all
accessible conductive parts (including knobs and con­
trols that may appear to be insulating) can render an
electric shock.
Use the Proper Fuse
To avoid fire hazard, use only the fuse of correct type,
voltage rating and current rating as specified in the parts
list for your product.
Refer fuse replacement to qualified service personnel.
Do Not Operate in Explosive Atmospheres
To avoid explosion, do not operate this product in an
explosive atmosphere unless it has been specifically
certified for such operation.
Do Not Operate Without Covers
To avoid personal injury, do not operate this product
without covers or panels installed. Do not apply power to
the plug-in via a plug-in extender.
@