Binary Address-Bi Nary Data; Expansion Option - Tektronix PM 101 Instruction Manual

Operating Instructions-PM 101
Note: While the user may define the radices for the
Address and Data fields, the Location and Control fields'
radices are fixed.
Binary Address-Binary Data. If bi nary is chosen for
the output radix for the Data and Address display fields,
and the Expansion Option is not present, no header as
such appears and the format is:
LOC:ddd CNTL:bbbb DATA:bbbbbbbb
ADDRESS:bbbbbbbbbbbbbbbb
LOC:ddd CNTL:bbbb DATA:bbbbbbbb
ADDRESS:bbbbbbbbbbbbbbbb TRIG
"b" is a binary digit,
where
"d" is a decimal digit, and
"TRIG" indicates the trigger value.
2-8
Expansion Option. If the user chooses non-binary
output radices for the Address and Data fields, but the
Expansion Option is present, the data is output in the
following format:
nnnnnnnnn
ddd
dddT nnnnnnnnn
"b" is a binary digit,
where
"n" is a binary, hex, octal, or ASCII digit
( default hex is shown),
"d" is a decimal digit, and
"T" indicates where the trigger occurred.
If both the Data Field Display and Address Field Display
radices are selected to be bi nary and the Expansion
Option is present, the output is in the following format:
LOC:ddd CONTROL:bbbb
AD:bbbbbbbbbbbbbbbbbbbbbbbb
DAT A: bbbbbbbbbbbbbbbb
LOC:dddT CONTROL:bbbb
AD:bbbbbbbbbbbbbbbbbbbbbbbb
DAT A: bbbbbbbbbbbbbbbb
where "d" is a decimal digit,
"b" is a binary digit, and
"T" indicates where the trigger occurred.
nnnnnn bbbb
nnnnnn
bbbb
@